Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire.

Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire. - 1940 Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire. - 1940
Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire. - 1940 Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire. - 1940
Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire. - 1940 Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire. - 1940
Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire. - 1940 Dragon 11000 , 9000 et 6000 – Concassage Mobile Primaire. - 1940

Détails

  • Prix: 1 FCFA (Prix fixe)
  • Région: Adamaoua
  • Ville: Adamaoua
  • Lieu: Gazikent Mahallesi 674/1 Sokak Gaziemir - Izm
  • Date: 14 déc. 2017
  • Catégorie: Équipements Industriels - Matériel proffessionel
  • État du produit: Nouveau

Contacter l'annonceur

CONTACTEZ & commerciale@dragonmachinery.com Mobile / WhatsApp / Viber: +90 542 666 11 11
Jaw crushers are widely used for crushing of large lumps of blasted rock and river gravel. Crushing action takes place between two jaws, the moving jaw is suspended on the eccentric shaft and is supported by a toggle plate against the crusher frame, performing a to-and-fro motion against the fixed jaw. In the upper section of the feed opening, the moving jaw performs a nearly circular elliptical motion, while the motion at the discharge end is a very narrow elliptical one leading to an up-and down motion. This causes the grip-crush effect at the upper part of the crushing chamber and an accelerated material flow at the discharge end. Often in practice it is not possible to obtain the desired degree of reduction with one crusher. Jaw crushers with large feed openings are used as primary crushers for crushing of large lumps. The size of the crusher should be selected on the basis of the lump size to be fed, required product size and the desired capacity.  Jaw crushers should be selected such that the feed opening should be considerably larger than the maximum lump size to be crushed. This reduces the danger of irregular shaped lumps blocking the feed inlet and as a result material can be fed continuously, the capacity of the whole plant is increased. To achieve the average desired capacity, losses in working conditions should be taken into consideration and crushers should be selected above theoretical values. DESCRIPTION THE FEED OPENING  is the horizontal dimension between the fixed and moving jaw plates, measured from a tooth top on one jaw plate, to a root between two teeth on the other. THE CRUSHER SETTING  is the discharge opening between the jaw plates farthest down in the crushing chamber. This is measured in the same way as, when the discharge opening is in the fully closed position. THE NIP ANGLE  is the angle between the fixed and moving jaw plates. This angle must not be greater than the optimum value otherwise the jaw plates can not grip the material properly and
the capacity will fall considerably

Autres specifications

Equipment ID: 1940

Annonceur privé

Pseudo: casmenDRAGON

Telephone:

Annonces similaires de Boutiques

Ces autres produits en boutiques pourraient aussi vous interesser

Annonces Similaires dans la region


Criblage et Lavage Mobile .617

  • 1 FCFA

  • Offre
  • Adamaoua
  • Adamaoua

CONTACTEZ commerciale@dragonmachinery.com Mobile / WhatsApp ...

  • Annonceur privé
  • 14 déc. 2017

Concasseur Mobile : Haute capacité , 3 produits differentes et 50% moins de consumation d’énergie.

  • 1 FCFA

  • Offre
  • Adamaoua
  • Adamaoua

CONTACTEZ commerciale@dragonmachinery.com Mobile / WhatsApp ...

  • Annonceur privé
  • 14 déc. 2017

Dragon 5000 et 4000 – Concassage Mobile Secondaire

  • 1 FCFA

  • Offre
  • Adamaoua
  • Adamaoua

CONTACTEZ,,,commerciale@dragonmachinery.com Mobile / WhatsAp...

  • Annonceur privé
  • 14 déc. 2017

Dragon Concasseur pour les matériaux dure Turbo 600 , 900 et 950 .

  • 1 FCFA

  • Offre
  • Adamaoua
  • Adamaoua

contactez --- commerciale@dragonmachinery.com Mobile / Whats...

  • Annonceur privé
  • 14 déc. 2017